Grade identity
- Manufacturer / code
- Erdemir / 6036
- Standard / designation
- ASTM A1018-2025 / SS 36 Type 2
- Product family
- Hot-rolled flat steel
Use and selection considerations
Assess the intended part, processing sequence, dimensions and delivery condition against your technical specification.
Hot-rolled sheet product information (Turkish)Technical data and conditions
The following values describe the selected Erdemir catalogue grade. Confirm the actual product form, thickness, delivery condition and test requirements against the order and material documents.
Scroll horizontally to read the complete table.
| Element | Value | Meaning |
|---|---|---|
| C | 0.25 | Maximum |
| Mn | 0.80–1.20 | Range |
| P | 0.035 | Maximum |
| S | 0.04 | Maximum |
Fully killed steel; Al/N ratio at least 2:1. This is a selected C/Mn/P/S table, not the full chemical specification. Other alloy and residual-element limits, including order-dependent Cu and conditional Ti, must be checked in the manufacturer catalogue.
Scroll horizontally to read the complete table.
| Property | Value | Meaning |
|---|---|---|
| Re | 250 N/mm² | Minimum yield strength |
| Rm | 400–550 N/mm² | Tensile strength range |
No thickness subbands are stated in this mechanical table. Elongation is not specified. Impact and bend tests are optional, on request; do not assume they have been performed. N/mm² equals MPa.
Prepare your enquiry
- Exact grade code and standard, including edition and any special requirements.
- Product form: coil or sheet; thickness, width and sheet length, with units.
- Quantity for each dimension, in tonnes or pieces.
- Intended use, forming, surface requirements and any technical drawing.
- Slitting, cut-to-length, packaging and other processing needs.
- Delivery destination, required date and contact details.
Mark any unresolved information explicitly.
Sources and manufacturer brochure
The grade identity is based on the OYAK Mining Metallurgy online catalogue. To find the grade, search for the exact Erdemir code and choose Flat products, then the appropriate hot-rolled or cold-rolled result. The catalogue detail depends on the current selection.
Open manufacturer catalogue (Turkish)Manufacturer: Erdemir. Listed standard: ASTM A1018-2025 · SS 36 Type 2.
Erdemir hot and plate products brochure (Turkish PDF)PDF · Turkish · 92 pages · 6,2 MB
The original brochure remains available as a reference. Standard editions in older brochures may differ from the current catalogue. These manufacturer references do not establish current stock, grade equivalence, project suitability or order-specific certification.
Discuss your requirement with us.
Share the grade, dimensions and processing requirements for your supply enquiry. Availability, price and delivery are confirmed during the discussion.
sahinbeyoglu@sahinbeyoglu.com+90 372 318 21 18